 |
| GRAPHIC INKS |
 |
 |
 |
| TEXTILE INKS |
 |
 |
 |
 |
 |
 |
|
| IMAGING & RECLAIM |
 |
 |
| SCREEN SUPPLIES |
 |
 |
 |
 |
 |
 |
 |
 |
| PRINTING EQUIPMENT |
 |
 |
 |
|
| Press Side Wash | |
MXPWR Press Side Wash |
PWR Pro Wipe Screen Opener is designed to open dried and /or clogged images on the screen during the production run. PWR is suitable for use in most recirculating systems. Works well on a wide variety of inks. Available in: 5 gallons, 55 gallons |
| Screen Wash | |
| MXPT - Multitex Pro Tex | All purpose biodegradable screen wash to be used at the sink or the press. Especially effective on Textile and UV inks. Does not break down emulsions and can be used with most Photopolymer emulsions. Available in: 1 gallon, 5 gallons, 55 gallons |
| MXIR2 - Ink Remover |
IR2 is a revolutionary new biodegradable ink remover designed for rapid, safe removal of all screen printing inks and remaining ghost images. BIO-2 is very aggressive while safe for the user and the mesh.
Biodegradable Available in: 5 gallons, 55 gallons |
Emulsion Removers All of our emulsion removers contain degreasing agents |
|
| MXER-288 | ER-288 is a ready to use formulation designed for fast removal of emulsions and capillary films from screens by means of a spray-on application. Ready To Use Available in: 5 gallons, 55 gallons |
| MXER 1-2-5 | ER 1-2-5 is a concentrated Emulsion Remover formulation designed for fast removal of emulsions and capillary films from screens by means of spray or wipe application. ER 1-2-5 has degreasers built in to eliminate additional steps in the reclamation process. Instructions: In a plastic container combine 1 part ER 1-2-5 with up to 4 parts water and mix thoroughly. Appy evenly to the emulsion side of the screen; allow to sit for 1 to 3 minutes; rinse with a medium pressure, low volume cold water rinse Fast removal of hardened emulsions Available in: 1 gallon only |
| MXERC | MXERC is a Super concentrated Emulsion Remover formulation designed for fast removal of emulsions and capillary films from screens by means of spray or wipe application. MXERC has degreasers built in to eliminate additional steps in the reclamation process. Instructions: In a plastic container combine 1 part MXERC with up to 30 parts water and mix thoroughly. Appy evenly to the emulsion side of the screen; allow to sit for 1 to 3 minutes; rinse with a medium pressure, low volume cold water rinse Fast removal of hardened emulsions Available in: 1 qt, 1 gallon, 5 gallons |
